Hydro Excavation in Denver
An independent, licensed plumbing contractor. Not affiliated with Denver Water or the City and County of Denver.
Hydro excavation cuts soil with pressurized water and removes the slurry with an industrial vacuum. It exposes buried lines precisely without a blade or bucket, which is why it is the safe way to dig around live utilities.
- Non-destructive digging around live utilities.
- Precise potholing to confirm depth and location.
- Smaller, cleaner excavation footprint.
- Works in frozen and compacted Denver soils.
Get Your Free Quote!
What Hydro Excavation Is
A pressurized water wand breaks up soil while a vacuum boom simultaneously lifts the resulting slurry into a debris tank. Nothing rigid or sharp contacts the ground, so buried pipe, conduit, and cable are exposed rather than struck.
The typical use is potholing, sometimes called daylighting: opening a small precise hole to confirm exactly where a line is and how deep it sits before committing to a larger excavation or a bore path.
It also produces a cleaner site. Spoil goes into a tank instead of a pile on the lawn, and the hole is narrow and vertical rather than sloped and wide.
(720) 935-6221Common Hydro Excavation Uses
- Potholing to verify line depth and position.
- Exposing utilities before boring or trenching.
- Digging safely around gas, electric, and fiber.
- Slot trenching for narrow, precise runs.
- Excavating tightly around tree roots.
- Digging in frozen or heavily compacted ground.
How We Diagnose It
When Hydro Excavation Is the Right Method
Hydro excavation is the right method whenever an unknown or live utility sits inside the dig zone and striking it is unacceptable. It is the standard approach to verifying a locate before a machine goes in.
It is also right when the excavation needs to be small and precise, when working around tree roots you intend to preserve, and when ground conditions are frozen or compacted enough to make conventional digging slow and rough.
It is the wrong method as the primary technique on large volume excavation. Moving a lot of material by water and vacuum is slower and costs more per cubic yard than a machine, so it belongs where precision or safety is worth that premium.
Conditions That Rule Hydro Excavation Out
- High volume digs where cost per yard governs.
- Large cobble or solid rock the water cannot cut.
- No practical way to stage the truck near the dig.
- No water supply or slurry disposal route available.
- Very deep excavation beyond effective boom reach.
How a Hydro Excavation Runs
- 1
Locate and Mark
Utility locates and electronic line locating define the target and everything nearby that must not be touched.
- 2
Set Up and Cut
The truck is staged, surface is cut cleanly, and the water wand begins breaking soil at controlled pressure.
- 3
Vacuum and Expose
Slurry is drawn into the debris tank as the hole advances, exposing the line without contacting it.
- 4
Verify and Restore
Depth and position are documented for the next phase of work, then the hole is backfilled and the surface is patched.
Talk Through the Method Before Work Starts
Disruption, Timeline, and Cost Drivers
Potholing is usually a same day task measured in hours. Site disruption is small: a truck, hoses, and a hole often no more than a foot or two across.
Cost drivers are the number of holes, depth, soil conditions, water supply and slurry disposal, how long the truck is on site, and access for staging the equipment near the work.
Compared per cubic yard, hydro excavation costs more than machine digging. Compared against striking a live gas or fiber line, it is inexpensive, which is the comparison that usually matters.
- Exposing crowded utilities with water and vacuum matters in soft, wet ground, which is the situation described on our Overland page
- Congested corridors between an old building face and the street are covered on our Uptown and North Capitol Hill page
Frequently Asked Questions
Related Methods and Services
Open Cut Excavation
Traditional trenching when the line has to be exposed and physically replaced.
Explore Open Cut ExcavationDirectional Boring
A steered bore that installs a new line on a new path under obstacles.
Explore Directional BoringLine Locating and Marking
Electronic locating that puts the line path and depth on the ground surface.
Explore Line Locating and MarkingMethod Comparison and Cost Guide
Side by side comparison of every method, what drives cost, and what rules each out.
Explore Method Comparison and Cost GuideDig Safely Around What Is Already Down There
Locate, pothole, confirm, then dig. Call to schedule non-destructive excavation.