Sewer Camera Inspection in Denver
An independent, licensed plumbing contractor. Not affiliated with Denver Water or the City and County of Denver.
A sewer camera inspection sends a self-leveling video head through the line to show pipe material, condition, defect type, and exactly where the problem sits. Every method decision on this site starts here, because everything else is a guess without it.
- Video of the actual pipe condition.
- Defect type, distance, and depth recorded.
- Distinguishes a clog from a broken line.
- Standard before purchase and before repair.
Get Your Free Quote!
What a Camera Inspection Tells You
A camera head on a flexible push rod travels the line while footage counts distance from the access point. A transmitting sonde in the head lets us locate the camera from the surface, so a defect seen on screen becomes a marked point in the yard with a known depth.
The inspection identifies pipe material and diameter, cracks and fractures, root intrusion, offset or separated joints, bellies holding standing water, scale and grease accumulation, and whether a section has collapsed.
It also answers the question that decides the whole job: is this a blockage in a sound pipe, or a failing pipe that will keep blocking no matter how often it is cleared.
(720) 935-6221What the Camera Identifies
- Pipe material, diameter, and general age condition.
- Cracks, fractures, and missing pipe wall.
- Root intrusion and where it is entering.
- Offset, separated, and leaking joints.
- Bellies and back-pitch holding standing water.
- Scale, grease, and debris accumulation.
- Collapse and the exact distance to it.
How We Diagnose It
When a Camera Inspection Is the Right Call
A camera inspection is the right call before any significant repair decision, after a second backup in the same line, before buying a property with mature trees or an older sewer, and after any repair so the finished work is documented.
It is also the right call when quotes disagree. If one contractor says patch and another says replace, video of the pipe settles it with evidence instead of opinion.
It is not useful when the line is completely full of water or debris, because the lens cannot see through it. In that case the line is cleared first and inspected after, which is why cleaning and inspection are often scheduled together.
When Inspection Has to Wait
- Line full of standing water or sewage.
- Heavy grease or sludge coating the lens.
- No cleanout or access point to launch from.
- Collapse close to the access point blocking travel.
- Active backup requiring the line be cleared first.
How an Inspection Runs
- 1
Find the Access Point
We locate a cleanout or establish access, then confirm the line is clear enough for the camera to see.
- 2
Run the Line
The camera travels the full run with distance recorded, so every defect has a measurement rather than a description.
- 3
Locate From the Surface
The sonde in the head is picked up from above so defects are marked on the ground with depth noted.
- 4
Review the Findings
We walk through what the video shows, what it means for method selection, and what happens if nothing is done yet.
Talk Through the Method Before Work Starts
Disruption, Timeline, and Cost Drivers
A standard inspection is under an hour with no excavation and no disruption beyond access to a cleanout.
Cost drivers are whether an accessible cleanout exists, whether the run must be cleared first so the camera has a view, line length, and whether surface locating and marking are included.
It is the least expensive step in any underground project and the one that prevents the expensive mistakes, which is why we will not quote a major repair without it.
- The value of a scope depends heavily on when it happens on a rebuild lot, which is laid out on our Cory-Merrill page
- For how a reported symptom narrows the likely cause before the camera goes in, see our Chaffee Park page
Frequently Asked Questions
Related Methods and Services
Line Locating and Marking
Electronic locating that puts the line path and depth on the ground surface.
Explore Line Locating and MarkingHydro Jetting and Descaling
High pressure water and cutting heads that strip grease, roots, and scale.
Explore Hydro Jetting and DescalingTrenchless Sewer Repair
The umbrella page covering every no-dig and low-dig repair method we run.
Explore Trenchless Sewer RepairMethod Comparison and Cost Guide
Side by side comparison of every method, what drives cost, and what rules each out.
Explore Method Comparison and Cost GuideFrom Our Guides
Guides on Camera Inspection and Diagnostics
- 01How Much Does a Sewer Camera Inspection Cost in Denver?Sewer camera inspection cost in Denver depends less on the camera itself and more on access, scope, and what is included in the visit. A quick residential inspection through an accessible cleanout is one thing.
- 02When Do You Need a Sewer Camera Inspection in Denver?A sewer camera inspection becomes useful when a drain problem stops looking like a one-time nuisance and starts looking like a pattern.
- 03Should Home Buyers Get a Sewer Scope in Denver?Yes, in many Denver purchases a sewer scope is one of the smartest extra inspections a buyer can add before closing.
See What Is Actually in Your Line
Inspection first, method second. Call to schedule a camera inspection.